1. Home
  2. Filtration
  3. Water Filter Cartridges
  4. Harmsco Filter Cartridges
  5. All Poly & High Purity Cartridges
  6. Hydrophilic Polyethersulfone Membrane Cartridges Water Service Grade
  7. Hydrophilic Polyethersulfone Membrane Cartridges 9-3/4 Inch Length
  8. Harmsco Hyrdrophilic Polyethersulfone Membrane Water Service Grade Cartridge, 0.04 Micron, 9-3/4 Inch Length, Case of 6
Harmsco Hyrdrophilic Polyethersulfone Membrane Water Service Grade Cartridge, 0.04 Micron, 9-3/4 Inch Length, Case of 6
Harmsco Hyrdrophilic Polyethersulfone Membrane Water Service Grade Cartridge, 0.04 Micron, 9-3/4 Inch Length, Case of 6
Write a Review

Harmsco Hyrdrophilic Polyethersulfone Membrane Water Service Grade Cartridge, 0.04 Micron, 9-3/4 Inch Length, Case of 6

Part Number: PES-975-0.04
Your Price: $1,125.82
Retail Price:$1,501.10
Your Savings:$375.28(25%)
Harmsco Hyrdrophilic Polyethersulfone Membrane Cartridge, 0.04 Micron, 9-3/4 Inch Length, Case of 6
Typically Ships in 2-10 Days Free Shipping
Feature: 2055

Choose Options

Quantity Price
1 $1,125.82
2 - 3 $1,035.75
4+ $968.21
Harmsco Hyrdrophilic Polyethersulfone Membrane Cartridge, 0.04 Micron, 9-3/4 Inch Length, Case of 6, Water Service Grade

Harmsco High Purity Pleated Cartridges are manufactured for use in most applications where absolute rated filtration is needed

- SOLD AS A CASE OF 6
- Long service life
- High flow rates
- Low pressure drops
- High permeability

Features
- 0.04 Micron
- 100% polypropylene; nothing to leach/contaminate
- High efficiency for critical filtration applications
- Pleated design for extended surface area
- Polypropylene end cap, thermally welded to media, cage and core
- USP Class VI - 121°C (250° F) for plastics
- 5.5 square feet of filtration media per 9-3/4" cartridge
- Offered in multiple lengths and end cap configurations to fit in competitive filter housings
- FDA Listed Materials: Manufactured from materials which are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations

Specifications

Construction Materials
   Membrane.................................Polyethersulfone (PES)
   Support Media..........................Polypropylene
   End Caps..................................Polypropylene
   Center Core..............................Polypropylene
   Outer Support Cage..................Polypropylene
   O-Rings/Gaskets.......................Buna, Viton, EPDM, Silicon, Teflon Encapsulated Viton

Toxicity
   All Polypropylene components meet the specifications for biological safety per USP Class VI: 250°F (121°C) for plastics

Dimensions
   Length: 9-3/4"
   Outside diameter: 2.7 inches (7.0 cm) nominal

Media Surface Area
   5.5 square feet per 9-3/4" length

Maximum Recommended Operating Conditions
   Temperature.................176°F (80°C)

Maximum Differential Pressures
   Forward........................50 psi (3.4 bar) at 68°F (20°C)
   Reverse.........................40 psi (2.7 bar) at 68°F (20°C)

FDA Listed Materials
   Manufactured from materials which are listed for food contact applications in Title 21 of the US Code of Federal Regulations

Sanitization/Sterilization
   Filtered hot water.................190°F (88°C) for 30 minutes at a maximum of 15 psid. Cartridges are chemically compatible with most ultra-pure chemicals, solvents and sanitizing agents.



Applications
- Deionized Water Systems                           - Recirculating Fluids
- General-use Water Filtration                       - Chemical Filtration
- Liquid Clarification                                     - Pharmaceutical
- Cosmetics                                                    - Final Filtration of Solvents, Acids, Bases

Recently Viewed Items

TOP
0 Items