1. Home
  2. Filtration
  3. Water Filter Cartridges
  4. Harmsco Filter Cartridges
  5. All Poly & High Purity Cartridges
  6. Hydrophilic Polyethersulfone Membrane Cartridges Water Service Grade
  7. Hydrophilic Polyethersulfone Membrane Cartridges 30 Inch Length
  8. Harmsco Hyrdrophilic Polyethersulfone Membrane Cartridge, 0.04 Micron, 30 Inch Length, Case of 6
Harmsco Hyrdrophilic Polyethersulfone Membrane Cartridge, 0.04 Micron, 30 Inch Length, Case of 6
Harmsco Hyrdrophilic Polyethersulfone Membrane Cartridge, 0.04 Micron, 30 Inch Length, Case of 6
Write a Review

Harmsco Hyrdrophilic Polyethersulfone Membrane Cartridge, 0.04 Micron, 30 Inch Length, Case of 6

Part Number: PES-30-0.04
Your Price: $3,372.80
Retail Price:$4,497.08
Your Savings:$1,124.28(25%)
Harmsco Hyrdrophilic Polyethersulfone Membrane Cartridge, 0.04 Micron, 30 Inch Length, Case of 6
Typically Ships in 2-10 Days Free Shipping
Feature: 2055

Choose Options

Quantity Price
1 $3,372.80
2 - 3 $3,102.98
4+ $2,900.61
Harmsco Hyrdrophilic Polyethersulfone Membrane Cartridge, 0.04 Micron, 30 Inch Length, Case of 6, Water Service Grade

Harmsco High Purity Pleated Cartridges are manufactured for use in most applications where absolute rated filtration is needed

- SOLD AS A CASE OF 6
- Long service life
- High flow rates
- Low pressure drops
- High permeability

Features
- 0.04 Micron
- 100% polypropylene; nothing to leach/contaminate
- High efficiency for critical filtration applications
- Pleated design for extended surface area
- Polypropylene end cap, thermally welded to media, cage and core
- USP Class VI - 121°C (250° F) for plastics
- 5.5 square feet of filtration media per 9-3/4" cartridge
- Offered in multiple lengths and end cap configurations to fit in competitive filter housings
- FDA Listed Materials: Manufactured from materials which are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations

Specifications

Construction Materials
   Membrane.................................Polyethersulfone (PES)
   Support Media..........................Polypropylene
   End Caps..................................Polypropylene
   Center Core..............................Polypropylene
   Outer Support Cage..................Polypropylene
   O-Rings/Gaskets.......................Buna, Viton, EPDM, Silicon, Teflon Encapsulated Viton

Toxicity
   All Polypropylene components meet the specifications for biological safety per USP Class VI: 250°F (121°C) for plastics

Dimensions
   Length: 30"
   Outside diameter: 2.7 inches (7.0 cm) nominal

Media Surface Area
   5.5 square feet per 9-3/4" length

Maximum Recommended Operating Conditions
   Temperature.................176°F (80°C)

Maximum Differential Pressures
   Forward........................50 psi (3.4 bar) at 68°F (20°C)
   Reverse.........................40 psi (2.7 bar) at 68°F (20°C)

FDA Listed Materials
   Manufactured from materials which are listed for food contact applications in Title 21 of the US Code of Federal Regulations

Sanitization/Sterilization
   Filtered hot water.................190°F (88°C) for 30 minutes at a maximum of 15 psid. Cartridges are chemically compatible with most ultra-pure chemicals, solvents and sanitizing agents.



Applications
- Deionized Water Systems                           - Recirculating Fluids
- General-use Water Filtration                       - Chemical Filtration
- Liquid Clarification                                     - Pharmaceutical
- Cosmetics                                                    - Final Filtration of Solvents, Acids, Bases

Recently Viewed Items

TOP
0 Items