Serv-A-Pure 71100P, BBFS-2S, Sediment
You are buying a whole house professional water filtration system that will reduce sediment in your water. This system comes standard with:
Filter #1 - DGD-5005-20 sediment filter, 155358
Pressure Gauge Locations
• Pressure Gauge #1 - Located at the inlet of the 1st filter housing. Measures incoming pressure to system.
• Pressure Gauge #2 - Located at the outlet of the 1st housing. Measures pressure drop across 1st filter.
It is recommended that your sediment filter be the first filter to come into contact with the water to help remove sediment that will cause premature plugging of the later filters.
Professional System Features
- Comes with a SW-4-HD metal housing wrench (Lifetime Warranty)
- Comes with a SW-4-HD metal housing wrench (Lifetime Warranty)
- Comes with both pressure gauges
- 1" In/Out brass ball valves
- Each housing drilled and tapped for drain valves
- Comes with 3 3/8" drain valves
Technical Specification
- Estimated Flow Rate: 5 GPM (This varies depending on which cartridge you choose. Check filter specifications for actual flow rate)
- Max Temperature: 100°F
- Max Pressure: 90 psi
- pH: >7, if below 7, contact Serv-A-Pure for proper application
- Comes with a SW-4 plastic housing wrench
- Estimated Flow Rate: 5 GPM (This varies depending on which cartridge you choose. Check filter specifications for actual flow rate)
- Max Temperature: 100°F
- Max Pressure: 90 psi
- pH: >7, if below 7, contact Serv-A-Pure for proper application
- Comes with a SW-4 plastic housing wrench
