Serv-A-Pure 73130P, BBFS-222SC, Sediment/Taste & Odor
You are buying a 2 step professional whole house water filtration system that will remove sediment and reduce taste and odor from your water. This system comes standard with:
Filter #1 - DGD-5005-20 sediment filter, 155358
Filter #2 - RFC20-BB taste & odor filter, 155247
72130P Filter Replacement Kit:
• SFP-507
Pressure Gauge Locations
• Pressure Gauge #1 - Located at the inlet of the 1st filter housing. Measures incoming pressure to system.
• Pressure Gauge #2 - Located at the outlet of the 1st housing. Measures pressure drop across 1st sediment filter.
• Pressure Gauge #3 - Located at the outlet of the 2nd housing. Measures pressure drop across 2nd filter.
It is recommended that your sediment filter be the first filter to come into contact with the water to help remove sediment that will cause premature plugging of the later filters.
Professional System Features
- Comes with a SW-4-HD metal housing wrench (Lifetime Warranty)
- Comes with a SW-4-HD metal housing wrench (Lifetime Warranty)
- Comes with all 3 pressure gauges
- 1" In/Out brass ball valves
- Each housing drilled and tapped for drain valves
- Comes with 3 3/8" drain valves
Technical Specification
- Estimated Flow Rate: 5 GPM (This varies depending on which cartridge you choose. Check filter specifications for actual flow rate)
- Max Temperature: 100°F
- Max Pressure: 90 psi
- pH: >7, if below 7, contact Serv-A-Pure for proper application
- Comes with a SW-4 plastic housing wrench
- Estimated Flow Rate: 5 GPM (This varies depending on which cartridge you choose. Check filter specifications for actual flow rate)
- Max Temperature: 100°F
- Max Pressure: 90 psi
- pH: >7, if below 7, contact Serv-A-Pure for proper application
- Comes with a SW-4 plastic housing wrench
