ServAPure SFP-105, MiniPak 2 Premium 3-Stage Filter Pack: (1) 155016, (1) 255417, (1) DPS-03N02000S4
Keep your Servapure MiniPak V2 system running at peak performance with the SFP-104 Filter Pack, a convenient 3-stage replacement set designed for superior sediment removal and chloramine reduction. This pack includes:
-
Pentek P5-20 (155016) – A 5-micron spun polypropylene filter for capturing larger sediment and rust particles, extending the life of finer filters.
-
Pentek ChlorPlus-20 (255417) – A high-capacity carbon block filter engineered for effective chloramine and chlorine taste/odor reduction.
-
Critical Process (DPS-03N02000S4) – An absolute-rated 0.03-micron pleated dual pleated filter offering precise particle removal. This FDA-compliant filter provides excellent filtration for critical applications such as food, beverage, and laboratory water.
Ideal for industrial or light commercial systems, this pack provides reliable protection and improved water clarity for your MiniPak setup. All filters are NSF-certified for material safety and performance. Order water sediment filters from Serv-A-Pure. Shop now!
P5-20 Spun Polypropylene
• #20 Filter, 20" Long
• Temperature Rating: 40 °F to 145 °F (4.4 °C to 62.8 °C)
• Micron Rating: 5 Microns
• Max Dimensions: 2-3/8" x 20" (60mm x 508mm)
• Initial Pressure (psi) @ Flow Rate (gpm): 0.6 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
• NSF Approved for Material and Structural Integrity
• Standard 20 Filters per Case
ChlorPlus-20 Chloramine Reduction
• #20 Filter, 20" Long
• Temperature Rating: 40 °F to 145 °F (4.4 °C to 62.8 °C)
• Micron Rating (Nominal): 1 Microns
• Max Dimensions: 2-7/8" x 20" (73mm x 508mm)
• Initial Pressure (psi) @ Flow Rate (gpm): 6 psi @ 2.0 gpm (0.41 bar @ 7.6Lpm)
• NSF Approved for Material and Structural Integrity
• Standard 6 Filters per Case
Critical Process DPS-03N02000S4 0.3 Micron Absolute Rated
• Micron Rating: 0.03 Micron
• Maximum Operating Temperature: 180°F (82°C) @ 10 psid in water
• Forward Differential Pressure: 50 psi (3.4 bar) @ 20°C
• Reverse Differential Pressure: 40 psi (2.7 bar) @ 20°C
• Recommended Changeout Pressure: 35 psid (2.4 psid)
• Filtration Media: Polyethersulfone
• Pre-filtration Media: Polyethersulfone
• Filtration Media Support: Polypropylene
• End Caps: Polypropylene
• Center Core: Polypropylene
• Outer Support Cage: Polypropylene
• Sealing Method: Thermal Bonding
• Length: 5" to 40" (12.7–101.6 cm) Nominal
• Outside Diameter: 2.75" (7.0 cm) Nominal
• Surface Area: 9.1 ft² (0.65 m²) per 10" length
• Validation: Tested using modified HIMA protocols
• Typical Applications, Endotoxin Removal
