Webtrol H60B27S-3PH Stainless Steel HT Series Booster Pump
The Webtrol HT Series is the original Heavy Duty Booster Pump, designed for high flow at high head. The HT series booster pumps are built to withstand the rigorous demands generated through use in the Reverse Osmosis, Deionization, Car wash, washdown and booster lift applications, as well as various other industrial and agricultural uses.
The design of the Webtrol HT Series Booster Pumps are virtually maintenance free in comparison to pumps that utilize bearing housings that require oil baths to operate. Ease of installation, dependability, performance and reliability are just a few of the reasons you should look at the Webtrol HT Series Booster Pumps.
Every Webtrol Booster Pump is hand assembled and checked during each step of the assembly process up to the final test where each pump is checked for flow, pressure, power consumption, leaks vibration and noise.
Features/Benefits
- Available in both Stainless Steel and Cast Iron Fitted models
- Heavy duty 7/8" diameter stainless stell shaft with a double keyway
- High strength, glass filled Noryl impellers precision machined for dimensional stability and efficiency
- Mechanical seals are stainless steel constructed with Buna N elastomers on cast iron models and Viton elastomers on stainless steel models.
Specifications
ModelNumber | H60B27S-3PH |
Suction | 3" FNPT |
Discharge | 1.50" FNPT |
HP | 25 HP |
Phase | 3 Phase |
Voltage | 220/460 |
Mounting | JM |
MaxInlet Pressure | 250 PSI |
Frequency | 50/60 Hz |
Speed | 3450 RPM |
Enclosure | ODP (Open Drip Proof) |
Construction
Inlet/MotorBracket | Cast 316 SS |
DischargeHousing | 316 SS |
PumpHousing | 316 SS Tubing |
Impellers | Noryl |
Diffusers | Noryl |
WearRings | 316 SS |
Shaft& Coupling | 316 SS |
ShaftBearing Sleeve | 316 SS |
ShaftBearing | Rulon |
MechanicalSeal | Carbon/Ceramic 316 SS, Viton |
MechanicalSeal Spacer | 316 SS |
O-Rings | Viton |
Applications
- Reverse Osmosis
- Deionization
- Car wash
- Washdown
- Booster Lift Station
- Industrial
- Agricultural
ModelNumber | H60B27S-3PH |
Suction | 3" FNPT |
Discharge | 1.50" FNPT |
HP | 25 HP |
Phase | 3 Phase |
Voltage | 220/460 |
Mounting | JM |
MaxInlet Pressure | 250 PSI |
Frequency | 50/60 Hz |
Speed | 3450 RPM |
Enclosure | ODP (Open Drip Proof) |