Serv-A-Pure 731122, BBFS-222SSC, Sediment/Sediment/Taste & Odor System

You are buying a 3 step whole house water filtration system that will remove sediment and taste & odor from your water. This system comes standard with a DGD-7525-20 sediment filter, a DGD-5005-20 sediment filter, and a GAC-20BB taste & odor filter.

Options for this system include:
• 3/4", 1" or, 1-1/2" Inlet/Outlet
• Wall Mounting Bracket and Mounting Hardware
• 3 Stage Filtering Process
      - Stage 1: Sediment filter removes sand dirt, rust and all other types of sediment
      - Stage 2: Sediment filter removes sand dirt, rust and all other types of sediment
      - Stage 3: Taste & Odor filter helps to remove unwanted tastes/odors, chlorine tastes/odors, and a 99.5% reduction of cryptosporidium, giardia, entamoebo and toxoplasma cysts depending on the filter you choose.
• SW-4 Wrench
• 1" Inlet/Outlet Ball Valve
• 0-100 PSI Simmons pressure gauges staged throughout the system.

Pressure Gauge Locations
• Pressure Gauge #1 - Located at the inlet of the first filter housing. Measures incoming pressure to system.
• Pressure Gauge #2 - Located at the inlet of the 2nd housing. Measures pressure drop across 1st sediment filter.
• Pressure Gauge #3 - Located at the inlet of the 3rd housing. Measures pressure drop across 2nd sediment filter.
• Pressure Gauge #4 - Located at the outlet of the 4th housing. Measures pressure drop across the 3rd filter (the taste/odor filter)

It is recommended that your sediment filter be the first filter to come into contact with the water to help remove sediment that will cause premature plugging in the taste/odor filter

In the available options below, you will be able to change what sediment and taste/odor filter you will want shipped to you. This system comes standard with a DGD-7525-20 sediment filter , a DGD-5005-20 sediment filter and a GAC-20BB taste/odor filter. It is best practice to start with a higher micron sediment filter for filter #1 and for filter #2 go to a lower micron filter.