Serv-A-Pure 618 Industrial Deionization Tank, 6" x 18", 0.25 Cu. Ft.
Description and Use
Serv-A-Pure's deionization tanks remove all total dissolved solids from the water fed to the DI tank. The water produced by Serv-A-Pures DI tanks are an excellent use for a spot-free car and RV wash, window cleaning, humidifcation units, laboratory glass washing and general DI water usage.
- Comes pre-filled with virgin mixed bed DI resin, ResinTech MBD-15
- Most industry standard sizes available
- Among the highest capacities in the industry
- Capable of reaching a resistivity of 18.2 MegOhm•cm
- Extremely low TOC levels
- Every system can be custom designed to meet each customers needs
Capacities
The capacity of a DI tank is dependent on the quality of the water fed to the tank. The worse water fed to a DI tank, the less amount of gallons of pure water it will produce. The better the feed water, the more gallons of pure water the DI tank will produce. The following chart is to be used as a reference only, as to how many gallons a DI tank of this size will produce. For more indepth information regarding the amount of gallons a certain DI tank will produce, please contact our engineers.
- Among the highest capacities in the industry
- Capable of reaching a resistivity of 18.2 MegOhm•cm
- Extremely low TOC levels
- Every system can be custom designed to meet each customers needs
Specifications:
- Tank Size: 6" x 18"
- Volume: 0.25 cubic foot
- Tank Head: Clack C1190
- In/Out Size: Clack CL07S-PVC 3/4" NPT Fittings (other Clack tail pieces can be purchased separatley to get you a different connection size)
- Resin Used: Virgin ResinTech MBD-15
- Di Capacity (As CaCO3 Grains): 2,650
- Weight: 22 Pounds
Capacities
The capacity of a DI tank is dependent on the quality of the water fed to the tank. The worse water fed to a DI tank, the less amount of gallons of pure water it will produce. The better the feed water, the more gallons of pure water the DI tank will produce. The following chart is to be used as a reference only, as to how many gallons a DI tank of this size will produce. For more indepth information regarding the amount of gallons a certain DI tank will produce, please contact our engineers.
| Feed Water Quality PPM |
Feed Water Quality us/cm |
Approx. Gallons Produced |
| 5.0 | 7.8 | 9,868 |
| 20 | 31 | 2,467 |
| 50 | 78 | 954 |
| 100 | 156 | 477 |
| 200 | 313 | 239 |
| 500 | 782 | 95 |
| 1,000 | 1,560 | 47 |
Operating Conditions
- Service Flow Rate: Up to 2.0 GPM
- Max Pressure: 125 PSI
- Max Temperature: 120°F
- pH Range: 1 to 14
- Wetted Materials
- Liner: Polyethylene
- Head: Polypropylene
- Fittings: Polypropylene
- O-Rings: Buna-N
- Drop Pipe: ABS
Typical Uses
- Car Wash
- Semiconductor Manufacturing
- Solar Cell manuacturing
- Airplane Washing
- Turbine Washing
- Window Cleaning
- RV Washing
- Laboratory Glass Washing
- Trace Elemental Analysis
- Boat Washing
- Pharmaceuticals
- Humidification Uses
- Electronics Manufacturing
Typical Connection Options
- Serv-A-Pure Industrial DI Tanks come with the Clack C1190 head along with the CL07S-PVC straight 3/4" MPT fittings. There are many other Clack tail piece options that would work with this tank/head combination. Here are some other options you could add to your order if you prefer a different connection type:
- 3/4" x 1" PVC Solvent Elbow: CL0710-PVC
- 3/4" John Guest Elbow: CL07-JG
- 3/4" FPT Elbow: WP90-GHT
- 1" MPT Elbow: CL10-PVC
