Pentek 155303, S1-20 Pleated Cellulose Cartridge, 2.5" x 20", 20 Micron
The Pentek S1-20 is a 2-1/2" x 20" cartridge that is designed for general water filtration purposes and is manufactured from a pleated cellulose media. These cartridges are economically prices and are highly effective at reducing sediment particles down to 20 microns.
The Pentek S1 is recommended to be used only for chlorinated water supplies and should not be used in well water applications where there is no chemical injection system.
Specifications
• S1-20 Pleated Cellulose
• #20 Filter, 20" Long
• Temperature Rating: 40 °F to 145 °F (4.4 °C to 62.8 °C)
• Micron Rating: 20 Microns
• Max Dimensions: 2-5/8" x 9-3/4" (67mm x 248mm)
• Initial ?P (psi) @ Flow Rate (gpm): 0.8 psi @ 10 gpm (0.06 bar @ 38 L/min)
• Recommended Flow Rate: (15 gpm (57 L/min)
• NSF Approved for Material and Structural Integrity
• Standard 14 Filters per Case
• S1-20 Pleated Cellulose
• #20 Filter, 20" Long
• Temperature Rating: 40 °F to 145 °F (4.4 °C to 62.8 °C)
• Micron Rating: 20 Microns
• Max Dimensions: 2-5/8" x 9-3/4" (67mm x 248mm)
• Initial ?P (psi) @ Flow Rate (gpm): 0.8 psi @ 10 gpm (0.06 bar @ 38 L/min)
• Recommended Flow Rate: (15 gpm (57 L/min)
• NSF Approved for Material and Structural Integrity
• Standard 14 Filters per Case
1 Customer Review
-
Service...
This purchase was seamless. The Customer service was exceptional! Thank you.
