Harmsco Hyrdrophilic Polyethersulfone Membrane Cartridge, 0.45 Micron, 19-1/2 Inch Length, Case of 6
Harmsco High Purity Pleated Cartridges are manufactured for use in most applications where absolute rated filtration is needed
- SOLD AS A CASE OF 6
- Long service life- High flow rates
- Low pressure drops
- High permeability
Features
- 0.45 Micron
Features
- 0.45 Micron
- 100% polypropylene; nothing to leach/contaminate
- High efficiency for critical filtration applications
- Pleated design for extended surface area
- Polypropylene end cap, thermally welded to media, cage and core
- USP Class VI - 121°C (250° F) for plastics
- 5.5 square feet of filtration media per 9-3/4" cartridge
- Offered in multiple lengths and end cap configurations to fit in competitive filter housings
- FDA Listed Materials: Manufactured from materials which are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations
Specifications
Specifications
Construction Materials
Membrane.................................Polyethersulfone (PES)
Support Media..........................Polypropylene
End Caps..................................Polypropylene
Center Core..............................Polypropylene
Outer Support Cage..................Polypropylene
O-Rings/Gaskets.......................Buna, Viton, EPDM, Silicon, Teflon Encapsulated Viton
Toxicity
All Polypropylene components meet the specifications for biological safety per USP Class VI: 250°F (121°C) for plastics
Dimensions
Length: 19-1/2"
Outside diameter: 2.7 inches (7.0 cm) nominal
Media Surface Area
5.5 square feet per 9-3/4" length
Maximum Recommended Operating Conditions
Temperature.................176°F (80°C)
Maximum Differential Pressures
Forward........................50 psi (3.4 bar) at 68°F (20°C)
Reverse.........................40 psi (2.7 bar) at 68°F (20°C)
FDA Listed Materials
Manufactured from materials which are listed for food contact applications in Title 21 of the US Code of Federal Regulations
Sanitization/Sterilization
Filtered hot water.................190°F (88°C) for 30 minutes at a maximum of 15 psid. Cartridges are chemically compatible with most ultra-pure chemicals, solvents and sanitizing agents.
Applications
- Wine - Soft Drinks
- Beer - Bottled Water
- Juices - Distilled Water
- R/O Pre-Filtration - Chemicals
