Harmsco HMC-36-FL Multi Cartridge Housing, 1,000 GPM
Features
- 304 stainless steel construction, standard
- 304 stainless stell components - includes cap/spring and V post, standard
- 150 psi (10.3 bar) pressure rating
- Multiple hold-down plats to accept DOE, 222/flat and 222/fin style cartridges
- Built to ASME design standards
- Bead blast finish, standard
- Adjustable top plates to accept 30" or 40" nominal length cartridges
- Assisted davit arm closure - 12 round and larger
- Two gauge ports, inlet and outlet sides
- Two drain ports provided - inlet and outlet fluids
- Maunfactured in the USA
Options
- ASME Code U-stamp
- Electropolished
- 316 Stainless Steel Construction
Applications
- Industrial Waste Water Treatment
- Industrial Waste Water Treatment
- Industrial Process (High Purity) Applications
- Ground Water Under Direct Influence (GUDI)
- Surface Water Treatment Rule (SWTR) LT2
- Reverse Osmosis Pre-filtration
- Municipal Drinking Water
- Cooling tower filtration
- Ground water remediation
Specifications
- Finish: bead blast
- Finish: bead blast
- Inlet/Outlet: FNPT on HMC-5, -7; flanged on HMC-12, -21, -36 and -51
- Construction: 304 SS
- Pressure: Up to 150 psi (10.3 bar) max
- Closure: BUNA o-ring housing seal with swing bolt closure
- Temperature: Up to 250°F (121°C), filter housing only
Filter Model | HMC-36-FL |
Max Flow Rate* (GPM) | 1,000 |
Max Flow Rate* (LPM) | 3,785 |
Max Flow Rate* (M3/Hr) | 227 |
Filter Height | 76.1" |
Width | 27-1/2" |
Diameter | 28" |
Inlet Height | 27-1/2" |
Outlet Height | 16-7/8" |
I/O Size | 6" |
I/O Type | Flange |
Drain Size | 1" FNPT |
Weight (lbs) | 695 |
* Flow rates shown above are for guidelines only. Actual flow rates are based on cartridge type, micron rating, viscosity, solids content and other factors. For complete flow and pressure drop information please refer to your cartridge manufacturer guidelines.