Enpress POLY-UF-TANK Ultrafiltration System Replacement Filter
This is the replacement filter and tank only, no control head. You are not able to replace just the filter in the POLY-UF-C system, you need to replace the tank that holds the cartridges.
The Enpress Poly-UF can be utilized as a final polishing stage or on water reclamation systems for Rainwater or Grey water, along with offering protection during power outages and intermittent power. The membrane is NSF 61 certified, and the system is BioVir certified and tested for log reduction. The vessel also comes standard with a bottom drain opening for ease of drainage and cleaning purposes of the tank system.
Applications
- Grey Water and Rainwater use, catchment and recycling
- Tannin Removal
- RO Pre-filter
- Polishing post filter filtration
- Colloid removal
- Bacteria, cyst and virus removal
Filtration Level- 0.02 micron
- Operating Temperature: 35 to 100 °F
- Operating Pressure: 10 to 100 psi
- Continuous Flow Rate: 10 GPM
- The system provides a treated flow of up to 12 GPM and 60 PSI
- Membrane is NSF 61 Certified
- Raw Water Specifications
- Pre-Filtration: 5 microns or less
- Chlorine: 1.0 ppm maximum for continuous flow (up to 2000 ppm for cleaning only)
- Iron: less than 0.30 ppm
- Manganese: Less than 0.05 ppm
- Silt density index; Less than 6.0
- pH: 3 to 11