Blue-White A1N10V-1T-P Peristaltic Chemical Feed Pump, 3.5-35 mL/min
Digital Variable Speed Unit
- Output: 3.5 - 35 mL/min
- Output Pressure: 65 PSI
- Two pump tubes supplied with each pump, no extra tubing required
- Peristaltic pump design does not have valves that can clog, reducing maintenance
- Self-priming, even against maximum line pressure. Bypass valves are not required. Will not vapor lock or lose prime
- Output volume is not affected by changes in back pressure
- Patented pump tube design installs easily and stays centered on the rollers without manual adjustment
- Accepts 4-20 mA, 0-10 VDC and pulse inputs for manual or external speed control
- Operator-friendly digital touch pad
- Easy-to-read LCD display
- Service and alarm indicator icons
- Displays motor speed or input signal values
- Prime mode for easy priming without changing programming
- Built-in Tube Detection Plus System (TFD+). Senses chemical in the pump head, shuts off the pump and activates a 1-amp alarm relay (dry contact closure)
- Compatible with Blue-White's output flow verification sensor system
- Durable housing made of chemical-resistant Valox (PBT) thermoplastic
Peristaltic injectors are well suited to metering chemicals that could foul heads with conventional check valves. Peristaltic pumps have rollers that compress the tube in a progressive squeezing action.
Blue-White's superior FLEXFLO peristaltic injectors have an impressive edge over the competition. Only FLEXFLO pumps feature Blue-White's patented pump tube design. It's easy to install and does not require manual advancement.
All FLEXFLO Peristaltic pumps are equipped with Blue-White's exclusive patented Tube Failure Detection System. No other manufacturer offers this feature.
NEW & IMPROVED PUMP HEAD & TUBE DESIGN
- Easy Reorder: Tube assemblies are now stamped with the simplified reorder number
- Increased Performance: Circumference of new pump head is more accurate, allowing for more accurate feed rates. Larger internal adapter ports handle higher viscosity fluids
- Increased Strength: A stronger pump head and adapter plate ensures adapters are secured in place. More durable tube adapters are manufactured from natural PVDF.
A-100 Specifications
- Feed Rate: 3.5-35 mL/min
- RPM: 30
- Max PSI: 65
- Pump Tube Part Number: A1-1T
- Pump Tube Material: Tygothane
- Max Fluid Temperature: 130°F
- Ambient Temp. Range: 14°F to 110°F
- Output Adjustment Range:
- 14 & 30 RPM with -1T, -2T tubes: 5-100% (20:1 turndown)
- All other models: 10-100% (10:1 turndown)
- Max Viscosity: 5,000 Centipoise
- Max. Suction Lift: 30 ft water (0 psig)
- Duty Cycle: Continuous
- Max. Solids: 50% by volume
- Amperage draw:
- 115V/60 Hz (A-100NFP = .513; A-100NVP = .350 amp max)
- 220V/50 Hz (A-100NFP = .660; A-100NVP = .175 amp max)
- Power cord plug type:
- 115V/60 Hz = NEMA 5/15 (USA)
- 220V/50 Hz = CEE 7/VII (Europe)
- Injection fitting O-Ring Seals: FKM and TFE/P (optional EP)
- Product Dimensions:
- A-100NFP = 6" H x 9-3/8" W x 9-1/8" D
- A-100NVP = 6" H x 9-1/2" W x 9-1/8" D
- Approximate Shipping Weight: 12 lbs
