1. Home
  2. Instrumentation
  3. Water Quality Meters
  4. HM Digital Meters
  5. Controllers
  6. HM Digital CIC-152: Dual Control Dosing/Injection TDS/EC Control
HM Digital CIC-152: Dual Control Dosing/Injection TDS/EC Control
HM Digital CIC-152: Dual Control Dosing/Injection TDS/EC Control
Write a Review

HM Digital CIC-152: Dual Control Dosing/Injection TDS/EC Control

Part Number: CIC-152
Your Price: $308.95
Retail Price:$348.00
Your Savings:$39.05(11%)
HM Digital CIC-152: Dual Control Dosing/Injection TDS/EC Control
Not for Sale Free Shipping
Feature: 2055
Quantity Price
1 $308.95
2+ $262.61
HMDigital CIC-152: Dual Control Dosing/Injection TDS/EC Controller


Features
- Monitors and controls dosing or injectionsystems
-Large, bright tri-color LED display
- Two adjustable set points keep TDS levels within a range (maximum andminimum TDS/EC levels)
- Minimum and maximum control points will activate relay control viaswitching dry contacts
- The CIC-152 can control two different devices (e.g., a pump and avalve)
- Two alarms (maximum and minimum levels) can be set independently ofthe control points
- Digital calibration
- On-screen temperature display
- On-screen range and control indicator lights (green, yellow, or red)
- Installs easily in minutes
- Includes one sensor probe (at no extra cost)
- Protective cover also available (sold seperately)
- Available with the NaCl conversion factor (model CIC-152) or the 442TMconversion factor (model CIC-152-4)


Specifications
- EC Range: 0-9999 µS
- TDS Range - 0-5000 ppm (CIC-152); 0-8500 ppm (CIC-152-4)
-Temperature Range - 1-80°C; 33-176 °F
- Accuracy: +/- 2%
- Conversion Factor: NaCl (avg. 0.5)
- Resolution - 0.1† ppm (0-999); 1† ppm (1000-9999)
- ATC - Yes (1 - 80 °C)
- Calibration - Digital (by push button)
- Factory Calibration - 1413 µS
- Set Points - Adjustable by push button. Control 2: Maximum TDS limit.Control Point 1: Lower TDS level.
-Relay control - The unit will transmit and analog signal (simpleswitch) via open or closed contacts to a device (e.g. pump/valve) whenthe ppm/µS level reaches the maximum TDS/EC limit (Control point 2) orthe minimum TDS/EC limit (Control Point 1). The contacts are switchedback to the normal position once the TDS returns to the acceptablerange.
- Relay Voltage - 5 V (attached devices must have their own powersupply)
- Alarm - Two independent alarms (set by user)
- Display - Bright 5/8" LED display
- Probe - 1/2" bushing, 3 meter (9.8 ft) shielded cable
- Power Supply - AC 110V/ AC 220V
-† Dimensions: 7.2 x 7.2 x 11.1 cm (2.8 x 2.8 x 4.4 in)
- Monitor Weight - 476 g (1 lb .8 oz)
-Total Weight: 680.4 g (1 lb 8 oz)


MSRP $348.00 /ea.

Recently Viewed Items

TOP
0 Items