The MiniPak Plus is an economical, easy-to-use. and one-in-all unit that will meet nearly all laboratory pure water needs. It incorporates all the benefits and simplicity of deionization (DI) without the added cost, complexity, and waste water of reverse osmosis (RO). The MiniPak Plus does not use any reservoir which allows bacteria to build up. All water produced is purified as it is drawn off on demand to reduce any possibilty of bacteria contamination. The MiniPak Plus can provide you with over 2 gallons of deionized water per minute. Whether you use 1 gallon per day or 100 gallons per day, the MiniPak Plus is a perfect fit for nearly every application.

   Specifications:

   Feed Water: Potable tap water with conductivity <2000 uS/cm @25 °C, at a
         pressure of 15-90* psi

   Flow Rates up to 2.5 gpm (9.5 L/min)
   Resistivity Up to 18+ MegOhm
   Bacteria Levels Less Than 1.0 cfu/mL
   Can Purify Tap Water from 1000 µS/cm
   TOCs Less Than 50 ppb

   Wall plate Dimension (H x W x D): 24"x 28" x 6"

   Floor Space Dimension, 844 (H x W x D): 72"x 28" x 8"

   Used For:

   Buffer and reagent preperation
   Microbiological culture and media preperation
   General washing
   Low volume dishwashing

The LabPak Plus UV is an economical, easy-to-use all-in-one unit that will meet nearly all laboratory pure water needs. It incorporates all the benfits and simplicity of deionization (DI) without the added cost, complexity, and waste water of reverse osmosis (RO). The LabPak Plus UV does not use any any reservoir which allows bacteria to build up. The main difference between the LabPak Plus UV and the MiniPak Plus, is that in the LabPak Plus UV all pure water remaining in the system is continually pumped through a UV germicidal lamp and a closed loop to greatly reduce any possibility of bacteria growth and allow for the most pure water possible. Standard options on the LabPak Plus UV are expensive options on many other DI water systems. The LabPak Plus UV is designed to provide water that is of high resistivity and low TOC (>10MegOhm*cm and ≤50ppb).

   Specifications:

   Feed Water: Potable tap water with conductivity <2000 uS/cm @25 °C, at a
         pressure of 15-90* psi

   Flow Rates up to 2.0 gpm (9.5 L/min)
   Resistivity Up to 10+ MegOhm
   Bacteria Levels Less Than 1.0 cfu/mL
   Can Purify Tap Water from 1000 µS/cm
   TOCs Less Than 50 ppb

   Wall plate Dimension (H x W x D): 31"x 42" x 6"

   Floor Space Dimension, 844 (H x W x D): 66"x 42" x 24"

   Used For:

   Buffer and reagent preperation
   Microbiological culture and media preperation
   General washing
   Low volume dishwashing